我国轧制技术的发展＆王国栋 刘相华 张殿华等 1
DEVELOPMENT OF STEEL ROLLING TECHNOLOGY IN CHINA＆Wang Guodong Liu Xianghua Zhang Dianhua et al 1
METAL FORMING 1
压力加工 1
自由程序轧制在1780生产线上的应用＆史乃安 沙笑春 杨军 7
APPLICATION OF SCHEDULE FREE ROLLING ON 1780 HOT ROLLING MILL＆Shi Naian Sha Xiaochun Yang Jun 7
五机架冷连轧机组轧制无取向硅钢板形控制目标曲线设定中附加应力的补偿＆贾生晖 欧阳金明 11
COMPENSATION OF ADD-STRESS IN FLATNESS OBJECT CURVEABOUT NONTROPISM SILICON STEEL ROLLING IN 5-STAND TANDEM COLD MILL＆Jia Shenghui Ouyang Jinming 11
优化冷连轧机轧制参数和辊型配置提高轧制效能和产品质量＆张大志 孙一康 李谋渭 等 14
OPTIMIZE ROLLING PARAMETERS AND ROLL SHAPE COLLOCATION OF TANDEM COLD STRIP MILL,IMPROVE ROLLING EFFICIENCY AND PRODUCT QUALITY＆Zhang Dazhi Sun Yikang Li Mouwei et al 14
热轧带钢宽向硬度波动的原因及改善措施＆刘献东 袁建光 谢文祥 等 18
THE CAUSE OF HARDNESS FLUCTUATION FOR HOT ROLLED STRIP AND THE MEASURE TO REDUCE IT＆Liu Xiandong Yuan Jianguang Xie Wenxiang et al 18
扁平材生产技术的发展趋势*Uwe Berger et al 22
TRENDS IN ROLLING TECHNOLOGIES FOR THE PRODUCTION OF FLAT PRODUCTS＆Uwe Berger ,Arno Frank,Rolf Steffen 22
STRIP TEMPERATURE CALCULATIONS FOR STECKEL MILL ROLLING＆David Martin Jussi Paavola Pekka M?ntyl? 28
炉卷轧机带钢轧制温度场计算＆D.Martin et al 28
INTER-STAND DEFORMATION OF STRIP DURING THE ROLLING PROCESS＆Leonid Lesik Henryk Dyia Sebastian Mroz 32
轧件在机架间的变形*Leonid Lesik et al 32
NEW TECHNIQUES FOR THE TANDEM COLD MILL MODERNIZATION OF BAOSTEEL YICHANG＆Makoto Tsuruda kenichi et al 36
宝钢益昌连续冷轧机在现代化改造中的新技术＆M.Tsuruda 36
PHYSICAL SIMULATION FOR THE DEVELOPMENT OF HOT ROLLING AND ANNEALING OF STEELS＆L.P.Karjalanen 39
热轧和退火的物理模拟＆L.P.Karj alanen 39
非对称轧制花纹钢板的理论分析 ＆M.Knapinski J.Markowski et al 43
THOERE TICAI ANAIIYSIS OF ASYMMETRICAI ROLLING PROCESS OF FLOOR PLATE＆Markowsk 43
TWIN ROLL CASTING OF STEEL STRIPSPECIAL STUDIES AND RECENT RESULTS＆A.R.Büchner 47
双辊连铸专门研究及最新成果＆A.R.Büchner 47
EXPERIMENTAL INVESTIGATION AND NUMERICAL SIMULATION ON SOLIDIFICATION AND VISCO-PLASTIC BEHAVIOR IN TWIN ROLL CASTING PROCESS＆Ju Dongying Zhao Hongyang Hu Lin 51
双辊铸轧工艺中的凝固和粘-塑性行为的实验研究与数值模拟＆巨东英 赵洪阳 胡林 51
DISCUSSIONS ABOUT THE SIDE SURFACE QUALITY OF THE SLIT STRIP STEELS＆Yan Tanli 58
纵切带钢侧断面质量问题的探讨＆鄢檀力 58
THE RAPID DEVELOPMENT OF TWIN ROLL STRIP CASTING OF STEEL AND THE STATUS OF ITS FUNDAMENTAL STUDY＆Di Hongshuang Zhang Xiaoming Wang Guodong et al 62
双辊铸轧薄带钢技术的飞速发展及其基础研究现状＆邱洪双 张晓明 王国栋 等 62
薄板坏连铸连轧技术的现状和新发展＆唐获 69
NEW DEVELOPMENT OF THIN SLAB CONTINUOUS CASTING AND ROLLING＆Tang Di 69
THE PCFC SYSTEM OF HANGANG CSP LINE＆Xia Tianji Zhang Zhanqiang Zhang Fenghong et al 77
邯钢CSP生产线的PCFC系统＆夏天济 张占强 张逢洪 等 77
EXPERIMENTAL STUDY ON TWIN ROLL HIGH SPEED STEEL STRIP CASTING＆Zhang Xiaoming Di Hongshuang Miao Yuchuan et al 81
双辊铸轧高速钢薄带实验研究＆张晓明 邸洪双 苗雨川 等 81
EVALUATION AND STATISTICS METHODS OF COLD-ROLLED STRIP FLATNESS＆Zhang Qingdong Zhou Xiaomin Liu Jingtao 85
冷轧带钢板形评价与统计方法＆张清东 周晓敏 刘静涛 85
热连轧机双相区轧制变形抗力数学模型开发＆刘献东 吴迪 赵宪明 等 89
DEVELOPMENT OF MATHEMATICAL MODELS OF RESISTANCE FOR HOT STRIP FINISH ROLLING OF TWO-PHASE REGION＆Liu Xiandong Wu Di Zhao Xianming et al 89
轧制过程数模调优＆王国栋 刘相华 巴力颖等 93
OPTIMIZATION TO MATH MODELS IN ROLLING PROCESS＆Wang Guodong Liu Xianghua Ba Liying et al 93
INDUSTRY APPLICATION OF SHAPE PRESET CONTROL MODEL FOR HC MILL BASED ON MECHANISM MODEL＆Peng Yan Liu Hongmin 96
基于机理模型的HC冷轧机板形预设定控制模型的工业应用＆彭艳 刘宏民 96
ON-LINE SURFACE QUALITY INSPECTION SYSTEM FOR COLD ROLLED STRIPS＆Xu Ke Xu Jinwu 100
冷轧带钢表面质量在线检测系统＆徐科 徐金梧 100
OUTLINE OF AUTOMATIC GAUGE CONTROL PRINCIPLE AND APPLICATION FOR BAOSTEEL YICHANG 1220mm TANDEM COLD MILL MODERNIZATION＆Wang Junsheng Liu Xianghua Wang Guodong et al 104
宝钢益昌1220mm冷连轧机组改造自动厚度控制原理与应用概述＆王军生 刘相华 王国栋 等 104
EFFECT OF FINISHING TEMPERATURE ON THE INSTRUMENTED IMPACT PROPERTIES OF HP295 STEEL SHEET＆Song Liqiu Tang Li Wang Yicheng et al 108
终轧温度对HP295钢板示波冲击性能的影响＆宋立秋 唐历 王义成等 108
DEVELOPMENT OF CAMBER SIMULATOR FOR HOT STRIP MILL＆Zhao Xianming Wang Guodong Liu Xianghua et al 112
带钢热轧侧弯模拟器的开发＆赵宪明 朴海斗 郑镇焕等 112
HIGH ACCURACY FORCE MODEL FOR COLD ROLLING----STRUCTURE AND COMPUTATION＆Li Guangying 115
高精度冷轧轧制力数学模型——结构与算法＆李光瀛 115
RESEARCH ON PERFORMANCE AND SPALLING CHARACTERISTICS OF BACK UP ROLL COLD STRIP MILL WISGCO＆Wu Guosheng 118
武钢冷轧厂支承辊使用性能及剥落特征研究＆吴国胜 118
宝钢2030mm冷连轧机IF钢轧制工艺的开发和应用＆王骏飞 陈守群 朱泉封 等 123
DEVELOPMENT AND APPLICATION OF IF STEEL ROLLING TECHNOLOGY IN 2030mm COLD ROLLING MILL OF BAOSTEEL＆Wang Junfei Chen Shouqun Zhu Quanfeng et al 123
板带钢冷轧动态板形辊（DSR）技术的机理与实践＆王骏飞 魏春生 张清东 126
THEORY AND PRACTICE OF DYNAMIC SHAPE ROLL FOR COLD ROLLING STEEL STRIP＆Wang Junfei Wei Chunsheng Zhang Qingdong 126
T-WRS＆C冷轧机工作特性及参数设定计算＆王军生 赵启林 矫志杰等 130
WORKING CHARACTERS AND SETUP CALCULATION OF T-WRS＆C COLD MILL＆Wang Junsheng Zhao Qilin Jiao Zhijie et al 130
热轧带钢板形综合控制策略及其在鞍钢1780生产线的应用＆赵林 杨旭 张冷 133
APPLICATION OF HOT STRIP SHAPE COMPREHENSIVE CONTROL STRATEGY AT 1780 HOT STRIP ROLLING LINE IN ANSHAN IRON AND STEEL COMPLEX＆Zhao Lin Yang Xu Zhang Leng 133
STUDY ON THE REHEATING AND BUFFERING MODEL FOR ROLLER HEARTH FURNACE----JOIN EQUIPMENT IN CSP PROCESS＆Wu Wenfei Zhang Xinxin 135
CSP生产线热衔接设备——辊底式加热炉热缓冲数学模型的研究＆武文斐 张欣欣 135
高电流密度电解清洗带钢技术＆吴建生 137
HIGH CURRENT DENSITI CLEANNING TECHNOLOGY FOR STRIP＆Wu Jiansheng 137
2800中板轧机板形控制性能的研究＆孙林 张清东 陈先霖 等 139
THE BEHAVIOR OF PROFILE AND FLATNESS CONTROL FOR 2800 PLATE MILL＆Sun Lin Zhang Qingdong Chen Xianlin et al 139
THE RESEARCH OF BATCH-ANNEALING TECHNIQUE ON COLD-ROLLED HIGH YIELD-STRENGTH STEEL＆Liu Hao Liu Jianing 141
冷轧高屈服强度钢的罩式退火工艺研究＆刘浩 刘家宁 141
热轧板凸度及冷轧压下率对粘接的影响＆祁卫东 143
INFLUENCE OF HOT ROLLING SHEET CROWN AND COLD ROLLING PRESSING RATE ON STICKING＆Qi Weidong 143
可逆中板精轧机压下负荷分配策略和模型的研究＆孙林 张清东 邵建生 等 145
STUDY ON THE MODEL IN SCHEDULING FOR REVERSIBLE PLATE MILL＆Sun Lin Zhang Qingdong Shao Jiansheng et al 145
THE EXPERT SYSTEM OF SLAB DESIGN FOR HEAVY PLATE MILLS＆Zhao Dewen Dong Xuexin Wu Junfeng et al 147
厚板轧机坯料设计专家系统＆赵德文 董学新 吴俊峰 等 147
SIMULATION ON PLATE ROLLING WITH GROOVE VERTICAL ROLLS USING FEM＆Liu Lizhong Zhao Xianming Liu Xianghua et al 149
具有孔型立辊调宽的平板轧制过程有限元模拟＆刘立忠 赵宪明 刘相华 等 149
THE EXPERIMENTAL STUDY ON THE RESISTING HEAT SHACK OF INFRARED RADIANT COATING WITH TRANSITION METAL OXIDES＆Ouyang Degang Luo Anzhi Zhao Xiujian et al 151
高抗热震性过渡金属氧化物系红外辐射涂料的实验研究＆欧阳德刚 罗安智 赵修建 等 151
3辊定径机的工艺探讨＆杨效勇 153
INVESTIGATION ON PROCESS OF 3-ROLL SIZING MILL＆Yang Xiaoyong 153
狄舍尔斜轧穿孔扩径方法及外径预测＆宋箭平 周志杨 沈江华 等 156
EXPANDING DI AMETER METHOD AND DIAMETER ESTIMATION OF DIESHER-TYPE PIERCER＆Song Jianping Zhou Zhiyang Shen Jianghua et al 156
X60无缝海底管线管的研制开发＆庄刚 赵晓林 郑贵英 等 160
RESEARCH AND DEVELOPMENT OF X60 SEAMLESS STEEL LINE PIPE FOR SEA FLOOR＆Zhuang Gang Zhao Xiaolin Zheng Guiying et al 160
油层套管在模拟井条件下的射孔试验＆付继成 张传友 吴成和等 163
PERFORATION TEST ON CASING UNDERTHE CONDITION OF SIMULATION WELL＆Fu Jicheng Zhang Chuanyou Wu Chenghe et al 163
高强度热采井专用套管TP100H的开发＆胡秉仁 卢小庆 方华 等 168
DEVELOPMENT OF HIGH STRENGTH CASING TP100H FOR STEAM INJECTION WELL＆Hu Bingren Lu Xiaoqing Fang Hua et al 168
API圆螺纹套管接头应力场分布实验研究＆王琍 172
EXPERIMENTAL RESEARCH OF STRESS FIELD DISTRIBUTION ON API ROUND THREAD CASING CONNECTION＆Wang Li 172
宝钢芯棒坯轧后开裂的工艺对策研究＆冯长桃 康永林 177
STUDY ON THE COUNTERMASURES OF THE OCCURRENCE OF CRACKING MANDREL BILLET DURING ROLLING PROCESS＆Fang Changtao Kang Yonglin 177
？279．4mm大口径气瓶管生产工艺开发＆张宝惠 岳世斌 张永厚 181
TECHNOLOGICAL DEVELOPMENT OF CYLINDER PIPEφ279.4mm＆Zhang Baohui Yue Shibin Zhang Yonghou 181
钻杆摩擦焊接、焊缝热处理参数监控系统＆朱世忠 183
DATA COLLECTING AND MANAGING SYSTEM FOR FRICTION WELDING AND POST-WELDING HEATTREATMENT OF DRILL-PIPE＆Zhu Shizhong 183
IMPROVE YIELD OF TUBE IN HOT ZONE BY REDUCE THE WASTE OF FIXED-LENGTH TUBE CROP＆Xue Jianguo 185
减少定尺管增厚端废，提高热轧钢管成材率＆薛建国 185
浅议SPC技术的现场应用＆李剑 187
APPLICATION OF STATISTICAL PROCESS CONTRAL TECHNOLOGY IN WORKSHOP＆Li Jian 187
THE INFLUENCE OF THREE ROLL EXPANSION PIERCING ON PIPE SURFACE QUALITY＆Li Yanghua 189
3辊扩径穿孔对钢管表面质量的影响＆李阳华 189
PRODUCTION TECHNOLOGY OF HIGH SPEED TRAIN WHEEL＆Ji Huaizhong 191
高速列车车轮的生产技术＆季怀忠 191
DEVELOPMENT OF RAIL FOR PASSENGER RAILWAY AT THE SPEED OF 200km/h IN PANGANG＆Mei Dongsheng Xu Quan 194
攀钢时速200km客运专线（PD3）钢轧开发＆梅东生 徐权 194
DESIGN OF UIC54 EXPORT RAIL FROM PASS SYSTEM＆Wang Bingyi Wu Zhangzhong Sun Bingyun et al 198
UIC54出口钢轨孔型系统的设计＆王秉义 吴章忠 孙秉云 等 198
革命性的ECR无头铸轧技术在生产特钢和普通长材中的应用＆Franco Alzetta Fabrizio Mulinaris 202
THE REVOLUTIONARY ECR*ENDLESS CASTING ROLLING PROCESS FOR THE PRODUCTION OF LONG PRODUCTS IN SPECIALTY AND COMMERCIAL STEEL＆Franco Alzetta Fabrizio Mulinaris 202
低投入高产出生产H型钢的新技术＆草场芳昭 208
NEW ROLLING TECHNOLOGY OF LARGE H-BEAMS WITH HIGH PRODUCTIVITY AND LOW INVESTMENT＆Yoshiaki KUSABA 208
THE INFLUENCE OF COOLING CONDITION ON MECHANCAL PROPERTIES OF STEEL REINFORCEMENT BAR＆B.Koczurkiewicz H.Dyja S.Mroz 213
冷却条件对钢筋力学性能的影响＆B.Koczurkiewicz H.Dyja et al 213
NEW DEVELOPMENT IN WIRE ROD MILL＆Peng Zhaofeng Li Yue 216
线材生产技术的新进展＆彭兆丰 李越 216
H08Mn2SiA在延迟型斯太尔摩控冷工艺中的研究与应用＆任玉辉 孙丽丽 孟贝 等 221
APPLICATION OF DELAYED STELMOR COOLING PROCESS ON H08Mn2SiA＆Ren Yuhui Sun Lili Meng Bei et al 221
HIGH PRECISION FLAT DIE STEEL PRODUCTION LINE PROCESS AND PASS DESIGN＆Cheng Yaojun Zhou Jiannan Liang Jun 226
高精度模具扁钢生产线工艺及孔型设计＆成耀君 周建南 梁军 226
高速成品倍尺飞剪的剪切精度控制＆丁文红 230
THE LENGTH ACCURACY CONTROL OF FLYING SHEAR IN MODERN HIGH SPEED BAR PRODUCTION LINE＆Ding Wenhong 230
530 SPACE SELF-ALIGNING HIGH RIGID MILL＆Shen Guangxian Shu Xuedao Liu Deyi et al 234
530空间自位型高刚度轧机＆申光宪 束学道 刘德义 等 234
RAPID HEATING TECHNOLOGY WORKING ON CONVECTION AND ITS APPLICATION＆Zheng Zhong Gao Jiarui 238
快速对流加热技术及其应用＆郑忠 高家锐 238
THE CHARACTERISTIC ANALYSIS OF WIRE-KNOTS FORMED BY STEEL-WIRE BOUNDING MACHINES＆Li Liang Chen Gong Yan Xiaoqiang 243
钢丝类打捆机线结特性分析＆李亮 陈工 闫晓强 243
NEW DEVELOPMENT OF H-BEAM ROLLING TECHNOLOGY AND THE STUDY ON ROLLING HBEAM BY PROFILED SLAB WITH WATER COOLED MOULD＆Wu Di Zhao Xianming Jin Qingzhen et al 247
H型钢轧制新技术及水冷模铸异型坯轧制H型钢研究＆吴迪 赵宪明 金庆珍 等 247
武钢重轨生产工艺装备改造及系列产品的开发＆孙一锋 251
REFORMATION OF PRODUCTION TECHNOLOGY EQUIPMENT AND DEVELOPMEnT OF SERIES PRODUCT OF RAIL IN WISCO＆Sun Yifeng 251
H08Mn2SiA线材控冷工艺研究及生产实践＆那劼 李飞等 255
STUDY ON THE CONTROL COOLING TECHNIQUES AND THE PRODUCTION PRACTICE OF H08Mn2SiA WIRE RODS＆Na Jie Li Fei Wang Quanli 255
PD3钢轨延伸率偏低问题的研究＆陈昕 金纪勇 李晓非 等 260
INVESTIGATION ON THE LOW DUCTILITY OF PD3 STEEL RAILS＆Chen Xin Jin Jiyong Li Xiaofei et al 260
20号槽钢在500轧机上的试制＆姜琛 王殿纯 翁绳厚 265
ADVANCED DEVELOPMENT OF 20# CHANNEL STEEL ON 500 ROLLING MILL ＆Jiang Chen Wang Dianchun Weng Shenghou 265
减少铁塔角钢隐性折叠措施探讨＆何晓波 郝晓燕 刘爱梅 等 266
DISCUSSION ON REDUCING HIDDEN OVERLAP IN TOWER USED ANGLE BAR＆He Xiaobo Hao Xiaoyan Liu Aimei et al 266
安钢型材机组矫直工艺的改进＆何晓波 刘书敏 罗卫萍 等 268
IMPROVEMENT OF STRAIGHEN PROCESS IN ANYANG STEEL SECTION ROLLING MILL＆He Xiaobo Liu Shumin Luo Weiping 268
THE DESIGN CHARACTERISTIC OF CONTINUOUS ROLLING PRODUCE ZONE IN HEAVY SECTION STEEL BILLET＆Zhang Xu 270
鞍钢大型钢坯连轧作业线的设计特点＆张旭 270
ANALYSIS AND MEASURE ON IMPROVEMENT THE QUALITY OF COIL COMPACTING＆Gao Yinbo 271
宝钢线材打捆质量问题的分析与对策＆高银波 271
INTRODUCTION ON CONTINUOUS SECTION PRODUCTION LINE OF HUAIYING IRON AND STEEL COMPANY＆Han Jianhuai Luo Dexing 273
淮钢全连续式型钢生产线简介＆韩建淮 罗德兴 273
ADJUSTMENT METHOD AND SETTING PRINCIPLE OF GUIDE CLEARANCE FOR H BEAM＆Cao Changdong 275
H型钢导卫间隙的调整方法与设定原则＆曹昌东 275
THE APPLIANCE OF CHARACTERISTIC REASON CHART IN STATING AND ANALYSING WIRE RECEIVE PERCENTAGE＆Zhu Xingan 276
特性要因图在高线成材率统计分析中的应用＆朱兴安 276
EQUIPMENT AND AUTOMATION 278
2050 HOT FINISHING MILL SELF-ALIGNING UNIFORMLY DISTRIBUTED LOAD DEVICE＆Shen Guangxian Chen Zhanfu Li Ming et al 278
2050热轧精轧机自适应均载装置＆申光宪 陈占福 李明 等 278
设备与自动化 278
新型带材自动纠偏装置的开发与研制＆方胜年 282
NEW STRIP AUTOMATIC POSITION CONTROL UNIT DEVELOPMENT＆Fang Shengnian 282
加工线用双枢轴开卷机＆B.Jubre 286
DOUBLE PIVOTING PAY-OFF REEL FOR PROCESSING LINES＆B.Jubre 286
AVESTA POLARIT的 RAP5生产线选用达涅利设备生产不锈钢＆Andrew orme 288
AVESTA POLARIT CHOOSES DANIELI FOR ITS RAP5 STAINLESS PROJECT＆Andrew Orme 288
静电涂油机的研究开发＆高全杰 291
STUDYING AND DEVELOPING OF ELECTROSTATIC OILER＆Gao Quanjie 291
小钢坯快速冷却床之开发＆林玉龙 294
AN INNOVATION TECHNOLOGY OF BILLETS FOR ACCELERATED COOLING＆Lin Yulong 294
热轧精轧机组工作辊热磨制度的研究＆何安瑞 杨荃 魏钢城 等 300
STUDY ON HOT GRIND SCHEDULE OF WORK ROLL IN FINISHING TRAINS OF HOT ROLLING＆He Anrui Yang Quan Zhang Qingdong et al 300
宝钢在役轧辊无损检测技术及其优化研究＆韩世全 张国星 303
THE NDT AND DEVELOPMENT OF ENLISTED ROLL IN BAO STEEL＆Han Shiquan Zhang Guoxing 303
SEALING CONDITION MANAGEMENT ABOUT THE FILM BEARING OF BAO STEEL BACK-UP ROLL IN ROLLING MILL＆Yuan Ju Shao Hongde 306
宝钢轧钢机支承辊油膜轴承密封的状态管理＆袁巨 邵鸿德 306
FAILURE ANALYSIS ON D.H.BACK UP ROLL BARREL BREAKAGE IN COLD STRIP MILLS WISGCO＆Wu Guosheng 309
武钢D.H.支承辊辊身断裂失效分析＆吴国胜 309
4辊轧机轴向力的生成机理及调控措施＆李友荣 刘安中 万晓丹 等 314
PRODUCING REASON AND ADJUSTING METHOD OF THE AXIAL LOAD IN FOUR-HIGH MILL＆Li Yourong Liu Anzhong Wan Xiaodan et al 314
FOUR-HIGH MILL-STAND CHATTER OF THE FIFTH-OCTAVE MODE＆Li Mouwei Lin He Wang Fengli et al 317
4辊冷轧机第五倍频程颤振＆李谋渭 林鹤 王峰丽 等 317
HIGH-DENSITY TUBE LAMINAR FLOW AND THE APPLICAION OF THICK PLATE PAST-ROLLING CONTROLLED COOLING＆Li Mouwei Zhao Yongzhong An Zhengang et al 321
高密度管层流及其在厚板轧后控冷上的应用＆李谋渭 赵永忠 陈涛 等 321
太钢新型淬火控冷系统＆李谋渭 王邦文 赵永忠 等 324
TAIGANG NEW QUENCHING CONTROL COOLING SYSTEM＆Li Mouwei Wang Bangwen Zhao Yongzhong et al 324
小波变换在声信号故障诊断中的应用＆张武军 徐金梧 杨德斌 等 327
MACHINE SOUND USING WAVELET AND ITS APPLICATION IN ROLLING BEARING FAULT DIAGNOSIS＆Zhang Wujun Xu Jinwu Yang Debin et al 327
采用达涅利第三代技术改造棒材步进式超短冷床区设备的实践＆申景阁 刘润生 孙保芹 等 330
PRACTISE OF REFORMING STEP BY STEP ULTSHORT COOL-BED IN BAR SHOP BY THE THIRD CLASS TECHNOLOGY OF DANIELI CORPERATION＆Shen Jingge Liu Runsheng Sun Baoqin et al 330
TRANSFORMATION OF No.2 STRAIGHTENING MACHINE OF CROSS-CUT LINE 2 OF WISGCO HOT STRIP ROLLING MILL＆Liu Qisheng 333
武钢热轧厂2号横切线2号矫直机改造＆刘启胜 333
CONSTANT PRESSURE AND VARIATION TYPE OIL CENTRALIZED LUBRICATION DEVICE＆Zeng Lichu 336
恒压变量型稀油集中润滑装置＆曾立楚 336
THE ROTOR BALANCE TECHNOLOGY ON-LINE＆Wu Wenxi Li Yongsheng 339
浅议转子现场平衡技术＆吴文溪 李永生 339
AN IMPROVEMENT FOR THE USAGE OF THE BLASTER FURNACE GAS＆Pan Keliang 343
高炉煤气在蓄热式分室快速加热炉上的应用＆潘克亮 343
几种燃烧器的试验研究＆丁翠娇 蒋扬虎 郑兆平 等 347
STUDY ON BURNERS OF INDUSTRIAL FURNACE＆Ding Cuijiao Jiang Yanghu Zheng Zhaoping et al 347
PROSPERCT AND LOOK FORWARD TO SiO2 CERAMIC ROLLER SLEEVE IN THE CONTINUOUS ANNEALING FURNACE＆Wang Jie 352
SiO2陶瓷辊套在连续退火炉的试用和展望＆王杰 352
THE ONLINE DYNAMIC BALANCE AND VIBRATION ANALYSIS ON LAYING HEAD OF HIGH SPEED ROD ROLLING MILL＆Yu Liangdong 353
宝钢高线吐丝机在线动平衡与振动分析＆余良栋 353
RIBBED BAR AND HIGH SPEED WIRE ON-LINE MEASURING＆Chen Bingsheng Liu Baoying 354
螺纹钢及高速线材的在线测量＆陈炳生 刘宝瑛 354
宝钢线材辊箱密封系统研究及国产化＆杨霄 356
RESEARCH AND HOMEMADE TRANSFORMATION OF ROLL HOUSING S SEAL SYSTEM ON BAOSTEEL WIRE ROD MILL＆Yang Xiao 356
GLUEY TECHNIQUE AND RESTORATION OF EQUIPMENT＆Zhou Bei Sun Meixia Liu Fumao 358
胶粘技术与设备维修＆周蓓 孙美霞 刘福茂 358
DANIELI RECENT HIGH FLEXIBILITY COMBINED BLOOM/SIAB CASTER PROJECTS＆Andrea Carboni et al 360
达涅利在高度灵活的板坯/方坯组合铸机设计上的最新实践＆Andrea Carboni et al 360
氧气转炉钢厂废气及粉尘的收集系统的优化＆Gunter Spangardt Markus Hogenschurz et al 364
OPTIMISED GAS AND DUST COLLECTIOM SYSYTEMS FOR BASIC OXYGEN STEELPLANTS＆Gunter Spang ardt et al 364
DEVELOPMENT OF BOF EQUIPMENT AND MANAGEMENT OF ITS EXISTING PROBLEMS＆Ren Xueping Qin Qin Lin Heng et al 366
大型转炉装备发展及所遇到问题对策＆任学平 秦勤 林恒 等 366
AIR JET COOLING TECHNIQUE APPLICATION OF BASIC OXYGEN FURNACE＆Qin Qin Zhang Bo Wu Diping et al 370
转炉炉壳空气喷吹冷却技术的应用＆秦勤 章博 高建祖 等 370
油气润滑状态下轴承的温度场和应力场＆陈宏军 章博 王三友 等 374
BEARING S TEMPERATURE AND STRESS FIELD UNDER OIL/AIR LUBRICATION＆Chen Hongjun Zhang Bo Wu Diping et al 374
喷枪升降旋转装置的设计与研究＆孙世辉 李继宏 徐艳 378
DESIGN AND RESERCH OF SPRAY-GUN LIFTING AND REVOLVING＆Sun Shihui Li Jihong Xu Yan 378
WPB喷粉脱硫装置的应用与改进＆刘仁华 欧阳克诚 381
APPLICATION AND IMPROVEMENT OF WPB SPRAY-POWDER DEVICE FOR DESULFURATION＆Liu Renhua Ouyang Kecheng 381
变频器在钢包烘烤器燃烧系统中的应用＆孙敬 崔丽丽 385
THE APPLICATION OF INVERTER IN COMBUSTION SYSTEM OF LADLE PREHEATING＆Sun Jing Cui Lili 385
DEVELOPED OF SC-200 STRESS RELAXATION TESTING MACHINE＆Zhang Qiang Wang Ping Li Zhengguo et al 388
SC-200应力松弛试验机研制＆张强 王平 李正国 等 388
STEELMAKING-CONTINUOUS CASTING-ROLLING PRODUCTION PLANNING AND CONTROLING BASED ON FUNNEL MODEL＆Tian Naiyuan Peng Qichun Xu Anjun et al 392
基于漏斗模型的炼钢-连铸-热轧生产计划与控制方法＆田乃媛 彭其春 徐安军 等 392
KDD AND GENETIC OPTIMUM SEEKING AND ITS APPLICATION IN BAO STEEL＆Su Dongping Wu Shaomin Su Yicai 396
KDD与遗传寻优及在宝钢的应用＆苏冬平 吴少敏 苏异才 396
IMPROVING METALLRUGICAL PERFORMANCE:REAL TIME INFORMATION MANGEMENT IN IRON/STEEL OPERATIONS＆A.Osvaldo 399
改进冶金性能：钢铁业的实时信息管理＆Osvaldo A.Bascur et al 399
OPTIMAL DISCR IMINANT PLANE OF INTERACTIVE PATTERN RECOGNITION AND ITS APPLICATION OF MULTIPLE OBJECTIVES DECISION MAKING OF 14MnNbq＆Zhang Yicheng Zhang Siling Zhan Shengli 405
交互模式识别的最优判别平面方法和它在14MnNbq多项性能优化中的应用＆张义成 张姒陵 詹胜利 405
基金会现场总线在冶金工业中的应用＆斯可克 409
THE APPLICATION OF FOUNDATION FIELDBUS IN METALLURGICAL INDUSTRY＆Si Keke 409
钢铁工业自动化的现状和技术发展＆薛兴昌 413
THE STATUS AND DEVELOPMENT OF METAL AUTOMATION＆Xue Xingchang 413
21世纪的工业自动化技术＆罗公亮 416
TECHNOLOGY OF INDUSTRIAL AUTOMATION IN 21 ST CENTURY-Information Technology,Intelligent Technology and Embedded Technology＆Luo Gongliang 416
美国Nucor公司Hertford厂世界最大板坯铸机的自动控制技术＆Luigi Morsut 422
AUTOMATION CONTROL IECINOLOCY FOR THE WORLD S LARGESI LSLAB CASPER AT NUCOR HERTFORD USA＆Luigi Morsut 422
连铸机自动化的前景＆H.Preissl W.Obermann et al 432
FUTURE ASPECTS IN CASTER AUTOMATION＆H.PreiBl W.Obermann et al 432
板坯连铸机升级的专门技术和解决方案＆Andreas Eichinger Heinz Hoedl et al 437
TAILOR MADE UPGRADING SOLUTIONS AND TECHNOLOGICAL PACKAGES FOR SLAB CASTERS ＆Andreas Eichinger,Heinz Hoedl,Karl Moerwald-VAI/Austria 437
奥钢联冷轧自动化工程的最新成果＆Rudolf Pichler Yves Leclercq 443
RECENT RESULTS FROM VAI s COLD ROLLING AUTOMATION PROJECTS＆Rudolf Pichler Yves Leclercq 443
SINTER PLANT AUTOMATION ON ANEW LEVEL＆D.Bettinger G.Straka K.Stohl 449
崭新水平的烧结厂自动化＆孙文东 D.Bettinger G.Straka 449
DEVELOPMENT AND APPLICATION OF TALENT-RESOURCES MANAGEMENT SYSTEM＆Huang Lihong Yang Yongning 458
人才资源管理信息系统的开发与应用＆黄丽红 杨永宁 458
包钢中煤自动称量及管理系统的设计与应用＆高士臣 于洁 龚纯喜 等 460
THE DEIGN AND APPLIXATION OF BAOGANG ZHONGMEI STATION AUTO-WEIGHTING SYSTEM＆Gao Shichen Yu Jie Gong Chunxi et al 460
THE REMOTE DATA NETWORK SYSTEM＆Yang Ying Qu Huimin 462
一个远程数据网络信息系统＆屈惠民 462
DEVELOPING AND APPLICATION OF NETWORK OF MEASURE MATTER CAPACITY＆Sun Yanwei Chen Zhongkai Shang Xibo 464
物资量数据通讯网络管理系统的开发及应用＆孙衍伟 陈忠凯 尚溪波 464
THE PROGRESS ANDINNOVATIONS OF AUTOMATIC IN HANDANIRON＆STEEL GROUP CO CTD TECHNOLOGIES＆Ren Fengqing 466
邯钢自动化技术的进步与创新＆任凤清 466
INFORMATION TECHNOLOGY＆APPLY＆Jing Wei 467
信息技术及其应用＆景伟 467
AUTOMATIC HEATING CONTROL SYSTEM OF No.5＆No.6 COKE OVEN IN BAO STEEL＆Zhi Xiaoming 469
宝钢5、6号焦炉加热控制系统＆支晓明 469
ESTIMATING AND CONTROL OVERFLOW DENSITY OF MINERAL GRINDING AND CLASSIFICATION＆Lai Yaodong Chen Youwen 470
磨矿分级溢流浓度的参数预估与控制＆来耀栋 陈友文 470
炼焦过程计算机管理与控制的实践及其发展方向的探讨＆赵永宽 刘旭明 周贵祥 等 471
THE PRACTICE OF COMPUTER CONTROL AND MANAGEMENT FOR COKING PROCESS AND DISCUSSION ON THE DEVELOPMENT ABOUT IT＆Zhao Yongkuan Liu Xuming Zhou Guixiang et al 471
THE INTUCTIVE RADIO CONTROL LINKING SYSTEM ON COKE OVEN OF WUHAN IRON＆STEEL Co.＆Wang Liguang Peng Hongyuan 473
武钢焦炉四大车感应无线控制连锁系统＆王黎光 彭洪源 473
SURVEY OF THE DYNAMIC CONTROL OF SECONDARY COOLING＆Chen Jianyao 475
二次冷却动态控制的研究与分析＆陈建尧 475
RESEARCH AND APPLICATION OF CONTROL MODEL FOR LD CONVERTER WITH SUBLANCE＆Du Bin Zheng Yiyu Qian Weidong 479
有副枪转炉模型的研究与应用＆杜斌 郑贻裕 钱卫东 479
质量判定模型在宝钢连铸生产中的应用＆张川 484
THE APPLICATION OF QUALITY JUDGEMENT MODEL TO THE CONTINUOUS CASTING PRODUCTION IN BAO STEEL＆Zhang Chuan 484
LD CONVERTER FERROALLOY MODEL CONTROL SYSTEM＆Huang Kewei Du Bin 490
转炉合金最小成本控制模型＆黄可为 杜斌 490
STEEL TEMPERATURE AND CONTENT INTELLIGENT CONTROL SYSTEM＆Sun Yanguang Tao Baisheng Wang Tienan 495
钢水温度和成分智能控制系统＆孙彦广 陶白生 王铁男 495
DISCUSSION ON ELECTROSTATIC PRECIPITATOR CONTROL FOR CONVERTER IN BAOSTEEL＆Lü Wei 499
宝钢转炉电除尘器控制的探讨＆吕蔚 499
APPLICATION OF NEURAL NETWORK FOR BOF AUTOMATION＆Wang Zhongdong 501
神经网络在转炉炼钢自动控制中的应用＆王忠东 501
氧枪漏水预警监控系统的研究与应用＆杨勇 吕海新 赵绪元 等 503
RESEARCH＆APPLICATION OF EARLY WARNING AND MONITORING SYSTEM FOR LANCE LEAKAGE＆Yang Yong Lü Haixin Zhao Xuyuan et al 503
1700mm带钢热轧生产线基础自动化控制系统＆李龙珍 504
BASIC AUTOMATION CONTROL SYSTEM FOR STRIP MILL 1700mm＆Li Longzhen 504
鞍钢1700热连轧炉区顺序控制概述＆范光明 梁红 508
SUMMARIZE ABOUT SEQUENCE CONTROL AT FURNACE OF AISC 1700 HOT STRIP MILL PLANT＆Fan Guangming Liang Hong 508
冷连轧机轧制过程优化设定技术（无规程轧制）及其应用＆朱泉封 周坚刚 王笑波 512
OPTIMAL SET-UP OF CONTINUOUS COLD ROLLING AND IT S APPLICATION＆Zhu Quanfeng Zhou Jiangang Wang Xiaobo 512
宝钢1580热轧板形动态控制模型优化＆王东升 吴建峰 刘献东 515
THE OPTIMIZATION OF SHAPE CONTROL MODEL IN 1580mm HOT MILL FACTORY OF BAO STEEL＆Wang Dongsheng Wu Jianfeng Liu Xiandong 515
MATHEMATICAL MODEL AND ALGORITHM FOR DEPOSITORY LOADING PROBLEM OF COOL STEEL COILS＆Dong Jiefang Zhang Hanxin Li Anping 519
冷卷入库的数学模型及算法＆董杰方 张汉欣 李安平 519
一类轧钢加热炉的解耦控制＆杨志 邓仁明 李太福 524
DECOUPLING CONTROL FOR A KIND OF STEEL ROLLING FURNACE＆Yang Zhi Deng Renming Li Taifu 524
RESEARCH ON MECHANICAL AND ELECTRICAL VIBRATION FOR MAIN DRIVE SYSTEM OF ROLLING MILL＆Duan Wei Li Chongjian 528
轧机主传动系统机电振荡的研究＆段巍 李崇坚 528
软启动在大功率电机中的应用＆马社芳 秦建章 李进舟 532
APPLICATION OF SOFT START IN HIGH-POWER MOTOR＆Ma Shefang Qin Jianzhang Li Jinzhou 532
APPLY PLC TECHNOLOGY TO 1700mm REVERSING MILL＆Zhang Baoxi 534
PLC技术在1700mm可逆轧机上的应用＆张宝溪 534
SIMULATION AND APPLICATION OF PREDICTION METHOD IN THE DYNAMIC REACTIVE COMPENSATION＆Feng Guochang Geng Mei Du Suzhou et al 536
预测方法在无功动态补偿中的应用及仿真＆冯国昌 耿媚 孙思先 等 536
承钢热连轧卷取机控制系统的改造＆熊啸松 王伟 丁辉 538
COILER CONTROL SYSTEM REFORMING IN HOT STRIP MILL CHENGDE IRON＆STEEL Co.＆Xiong Xiaosong Wang Wei Ding Hui 538
DYNAMIC REACTIVE COMPENSATION SYSTEM REFORMED WITH SIMADYND CONTROLLER IN THE HOT STRIP MILL OF WISCO＆Tang Yaolin Shi Xianglin Xia Xue 540
采用SIMADYND控制器改造的武钢热轧厂动态无功补偿系统＆汤耀林 石祥林 厦悦 540
THE EXPLOITATION AND APPLICATION OF FUZZY CONTROL THEROY USED IN HEATING FURNACE＆Zhu Tong Chen Mao 541
加热炉模糊控制系统的开发与应用＆朱彤 陈茂 541
五维水平衡与钢铁工业的节水＆朱志文 543
FIVE-DIMENSIONAL WATER BALANCE AND WATER SAVING FOR IRON AND STEEL INDUSTRY＆Zhu Zhiwen 543
产品 549
SOME TOUGHNESS PROBLEMS OF DOMESTIC STEEL STRIP GR.X70 FOR PIPELINE＆Dong Tao Fu Junyan 549
PRODUCTS 549
X70级管线钢国产化中的韧性问题＆东涛 傅俊岩 549
STUDY ON MICRO ALLOY-Nb PIPELINE STEEL OF HANSTEEL COMPACT STRIP PRODUCTION TECHNOLOGY＆Li Ni Cui Guoqi Huang Yuchao et al 554
邯钢薄板坯连铸连轧工艺铌微合金管线钢的研制＆李霓 崔国旗 黄玉超 等 554
油气输送管线用高强高韧性宽厚钢板的开发＆常跃峰 刘生 558
THE DEVELOPMENT OF WIDE AND HEAVY STEEL PLATE WITH HIGH STRENGTH＆HIGH TOUGHNESS FOR CROUDE OIL AND NATURAL GAS TRANSMISSION PIPELINE＆Chang Yuefeng Liu Sheng 558
09UcPTiRE耐大气腐蚀热轧板的研制＆刘立群 王东明 曹刚等 562
DEVELOPMENT OF 09CuPTiRE WEATHER RESISTANT HOT-ROLLED PLATE＆Liu Liqun Wang Dongming Cao Gang et al 562
ANALYSIS ON FACTORS AFFECTING COLD BENDING PROPERTY OF HIGH STRENGTH STEEL PLATE FOR SHIP BUILDING＆Song Yaohua Zhou Pei 567
影响高强度船板冷弯性能因素分析＆宋耀华 周佩 567
本钢供兰-成-渝管线工程用X60管线钢生产实践＆张鹏 韩力 焦金华 等 571
PRACTICAL PRODUCTION OF X60 PIPELINE STEEL FOR LAN-CHENG-YU PIPELINE PROJECT＆Zhang Peng Han Li Jiao Jinhua et al 571
A32、A36高强度船板研制与开发＆朱爱玲 黄一新 574
STUDY AND DEVELOP ON A32、A36 HIGH STRENGTH SHIP PLATE＆Zhu Ailing Huang Yixin 574
ABS高强度船板钢拉伸裂纹的分析与预防＆刘旭辉 凃立均 刘昆华 等 577
ANALYSIS AND PREVENTION OF DRAWING CRACKS ON ABS HIGH-STRENGTH SHIP PLATES＆Liu Xuhui Tu Lijun Liu Kunhua et al 577
鞍钢1780mm机组汽车大梁板A420L、A510L的研制开发＆时晓光 刘立群 王东明 等 582
DEVELOPMENT OF A420L、A520L BEAM STEELS ON ANGANG S 1780mm HOT-ROLLING MILL＆Shi Xiaoguang Liu Liqun Wang Dongming et al 582
QUALITY ANALYSIS OF HOT ROLLED SHEETS FOR WELDED GAS CYLINDERS＆Song Tao Zhang Peng Zhang Yongfu 588
焊接气瓶用热轧钢板质量分析＆宋涛 张鹏 张永付 588
热轧带钢卷取温度控制中的热流密度系数的优化＆蔡晓辉 张殿华 王国栋 591
OPTIMIZATION OF THERMAL DENSITY COEFFICIENT IN COIL TEMPERATURE CONTROL ON HOT STRIP＆Cai Xiaohui Zhang Dianhua Wang Guodong 591
ONLINE TEXTURE DETERMINATION IN STEEL SHEETS USING THE X-RAY AREA DETECTOR＆Chen Leng Mao Weimin Feng Huiping 594
用X射线面探测器系统在线检测钢板织构＆陈冷 毛卫民 冯惠平 594
D GRAD STEEL PLATE MAKING BY HOT ROLLING＆Fang Tuoye Zhang Wenyang 598
低合金高强度D级板试制（Q345D和DH36船板试制）＆方拓野 张文洋 598
CAUSES ANALYSIS OF ROLL BREAKAGE OF HOT REVERSING PLATE MILL AND COUNTERMEASURES＆Fu Zhiyun Wang Jiping 600
中厚板轧机断辊事故原因分析及对策＆付志云 王继平 600
STUDY AND DEVELOPMENT OF ULTRA HEAVY SHIP PLATE＆Jin Tao Gu Chunfeng Wang Xiangru 602
特厚船板开发与研究＆金涛 顾春风 王湘儒 602
ANALYSIS ON RED OXIDIZED SCALE OF HOT ROLLING STRIP＆Min Honggang Jin Yuegui 604
热轧钢板红色氧化铁皮的浅析＆闵洪刚 金月桂 604
THE CONTRASTING ANALYSIS AND RESEARCH OF THE CAPABILITY STATE BETWEEN 16Mnq AND WQ490D PRODUCED IN WISCO＆Yan Jun Li Hongquan 605
武钢16Mnq与WQ490D性能状况对比分析及研究＆严峻 李洪泉 605
NEW APPROACH OF LOW CARBON DEEP DRAW COLD STRIP.QUALITY IMPROVEMENT＆Li Mangmang 607
冷轧低碳深冲钢质量改进新途径＆李茫茫 607
在合金化热镀锌钢板上电镀铁锌合金镀层的研究＆柳长福 郭玉华 王志义 等 610
STUDY OF ELECTROLYTIC Fe-Zn ALLOY COATING ON THE ALLOYED HOT-DIP GALVANIZED（HDG）STEEL SHEET＆Liu Changfu Guo Yuhua Wang Zhiyi et al 610
宝钢高强度冷轧汽车板的制造与应用＆王利 614
MANUFACTURE AND APPLICATION OF HIGH STRENGTH COLDROLLED AUTOMOBILE SHEET STEEL IN BAO STEEL＆Wang Li 614
武钢汽车用钢新产品的开发与发展＆彭涛 钟定忠 618
RECENT DEVELOPMENT OF AUTOMOBILE STEELS IN WUHAN IRON AND STEEL CORP＆Peng Tao Zhong Dingzhong 618
钢制两片罐灌装碳酸饮料中铁离子析出水平及控制方法的研究＆吴军 黄邦霖 晏人芸 等 622
STUDY ON CONTROLLING THE LEVEL OF IRON-PICK-UP IN THE TWO-PIECE STEEL CAN FILLED WITH CARBONATED BEVERAGE＆Wu Jun Huang Banglin Yan Renyun et al 622
我国电工钢生产技术现状及发展目标＆方泽民 625
THE PRESENT STATUS AND SOAL ON CHUINESE ELECTRICAL STEEL PRODUCTION TECHNIQUE DEPARTMENT＆Fang Zemin 625
冷轧硅钢表面缺陷形成原因研究＆李国宝 骆忠汉 刘良田 等 631
RESEARCH ON THE SURFACE DEFECTS ON COLD ROLLED SILICON STEEL SHEETS＆Li Guobao Luo Zhonghan Liu Liangtian et al 631
无氧化加热技术在取向硅钢脱碳退火中的应用＆王杰 636
NON-OXIDIZING HEATING TECHNICS ARE USED IN DECABURIZING ANNEALING PROCESS OF ORIENTED SILICON STEEL＆Wang Jie 636
DEFORMATION BEHAVIOR OF FERRITIC ROLLING AND MODIFICATION OF ROLLING FORCE MODEL＆He Xiaoming Zhang Pijun Wang Zhaodong et al 640
超低碳钢铁素体区热变形行为研究与轧制力模型的改进＆何晓明 张丕军 王昭东 等 640
轧制方式对取向硅钢薄带冷轧织构的影响＆高秀华 齐克敏 崔玉新 等 644
EFFECT OF THE ROLLING METHODS ON ROLLING TEXTURES OF THIN GRAIN ORIENTED SILICON STEEL SHEETS＆Gao Xiuhua Qi Kemin Cui Yusuo et al 644
PREPARATION AND APPLICATION OF D-T52 ELECTROLYTIC TINPLATE＆Tu Yuangqiang Liu Changfu Guo Yuhua et al 647
D-T52电镀锡钢板的研制与应用＆涂元强 柳长福 郭玉华 等 647
THE PROCESS AND PRODUCT SURFACE QUALITY OF STRIP CONTINOUS HOT DIP GALVANNIZING＆Lü Jun 651
带钢连续热镀锌工艺与产品表面质量＆吕军 651
建筑用钢筋发展展望＆程志军 徐有邻 653
PROSPECT ON DEVELOPMENT OF STEEL BARS USED IN BUILDINGS＆Cheng Zhijun Xu Youlin 653
美国的建筑结构用钢＆蔡益燕 657
STEEL FOR BUILDING CONSTRUCTION IN USA＆Cai Yiyan 657
冷弯型钢在房屋建筑中的应用与发展＆何保康 李风 丁国良 660
THE APPLICATION AND DEVELOPMENT OF COLD-FORMED STEEL IN BUILDING CONSTRUCTIONS＆He Baokang Li Feng Ding Guoliang 660
建筑用压型钢板的生产及应用＆弓晓芸 665
PRODUCTION AND APPLICATION OF PROFILED STEEL SHEET FOR BUILDING AND CONSTRUCTION＆Gong Xiaoyun 665
地震区建筑用钢的开发＆龚士弘 盛光敏 669
DEVELOPMENT OF BUILDING STRUCTURAL STEELS FOR SEISMIC AREAS＆Gong Shihong Seng Guangmin 669
THE ACTUALITY OF PRODUCTION AND APPLICATION OF DOMESTIC HOT ROLLED H-BEAM＆Wu Jiecai Xi Tie 673
国内热轧H型钢生产及应用现状＆吴结才 奚铁 673
TRIAL PRODUCTION AND DEVELOPMENT OF THE HRB400 SMALL DIAMETER HOT ROLLED RIBBED BAR＆Huang Zhaoxin Wang Guangshun Wang Xiubo 678
HRB400细直径热轧带肋钢筋的试制与开发＆黄肇信 王广顺 王秀波 678
JL785MPa高强度预应力精轧螺纹钢筋的研制＆李飞 谢瑞萍 杨雄 等 682
RESEARCH ON JL785Mpa HIGH-STRENGTH REINFORCED BAR FOR PRESTRESSING CONCRETE＆Li Fei Xie Ruiping Yang Xiong et al 682
PRODUCTION-PRACTICE ON V-N MICROALLOYED HRB400 REBAR＆Wang Quanli Yang Xiong Lu Liyan et al 686
V-N微合金化HRB400钢筋的生产实践＆王全礼 杨 雄 鲁丽燕 等 686
影响φ12．5mm、SWRH82B盘条性能的控冷工艺分析＆黎静 谭钢军 吕学斌 等 690
THE INFLUENCE OF CONTROL-COOLING PROCESS ON THE PERFORMANCE OF LARGE-DIAMETERφ12.5mm SWRH82B WIRE＆Li Jing Tan Gangjun Lü Xuebin et al 690
MECHANISM OF RUST AND CORROSI ON RESISTENCE AND ITS APPLICATION IN RIBBED BAR PRODUCTION＆Yuan Pengju Wang Fengxian Wang Huaju et al 695
阻锈处理机理及其在钢筋生产中的应用＆袁鹏举 王奉县 王化巨 等 695
ABOUT THE PRODUCTION OF REBAR 400MPA GRADE WITH PLAIN CARBON STEELUSING NEW STRATEGIES＆Chen Qi an Yang Zhongmin Wang Ruizhen et al 699
以新技术用Q235生产400MPa级钢筋的探讨＆陈其安 杨忠民 王瑞珍 等 699
RESEARCH ON VANADIUM-MICROALLOYED HRB400 EARTHQUAKE RESISTANCE RIBBED BARS OF CHENGDE IRON＆STEEL COMPANY＆Meng Xianheng Zhang Yuefeng 702
承钢钒微合金化HRB400抗震钢筋的研制＆孟宪珩 张越峰 702
CONTROL COOLING OF WIRE RODES ER70S-6 USED FOR WELDING ELECTRODE＆Liu Jibin Wang Yutao Miao Kai et al 706
焊接用钢盘条ER70S-6的控冷工艺研究＆刘吉斌 王玉涛 缪凯 等 706
热轧钢筋的性能分析＆齐长发 王云阁 711
PROPERTIES ANALYSIS OF THE HOT ROLLED BARS＆Qi Changfa Wang Yunge 711
PROGRESSES IN LIGHTWEIGHTING RESEARCH AND PROSPECT OF AUTOMOBILE STEEL DEVELOPMENT＆Cui Jian Lu Jiangxin Zhang Pijun 715
汽车轻量化研究的进展和汽车用钢的发展方向＆崔健 陆匠心 张丕军 715
INVESTIGATION OF APPLYING MICROALLOYING TECHNOLOGY AND DEVELOPING MICROALLOYING STEEL IN CHINA＆Dong Tao Fu Junyan 719
我国微合金化技术应用和微合金化钢开发的调查＆东涛 付俊岩 719
ON DISSOLUTION OF ALUMINUM NITRIDES IN REHEATING IN ALKILLE4D HIGH NITRINEN STEELS＆G.T.Kurth 722
铝脱氧高氮钢加热时氮化铝的溶解＆陆军生 722
MODEL FOR PREDICTION OF HARDENABILITY DURING STEEL PROCESSING＆Tadeusz Siwecki Bi?m Rodell 725
预测处理过程中的淬透性模型＆Tadeusz Siwecki Bj?rn Rodell 725
优化工艺改善H型钢的横向冲击韧性的研究＆蒲玉梅 李忠义 730
OPTIMIZATION OF PROCESS PARAMETER FOR IMPROVING LOW TEMPERATURE TRANSVERSE TOUGHNESS OF H BEAM STEEL＆Pu Yumei Li Zhongyi 730
THE APPLICATION OF CRYSTAL ORIENTATION MAP IN THE RESEARCH OF IRON AND STEEL＆Chen Jiaguang 733
晶体取向显微成像术在钢铁材料研究中应用＆陈家光 733
天津钢管公司微合金化钢的开发与研究＆胡儒卓 李润洪 李群 738
THE DEVELOPMENT AND RESEARCH OF FINE ALLOYING STEEL FOR TIANJIN PIPE CORPORATION＆Hu Ruzhuo Li Runhong Li Qun 738
硅锰含量对10SiCrNiCu钢冲击转变温度的影响＆王道远 朴希红 740
EFFECTS OF Si Mn CONTENT ON IMPACT TRANSITION TEMPERATURE OF 10SiCrNiCu＆Wang Daoyuan Piao Xihong 740
焊炸预处理提高WD钢模拟CGHAZ韧性的研究＆李荣锋 戴树和 沈士明 等 742
STUDY ON INCREASING THE ·SIMULATED CGHAZ TOUGHNESS OF WD STEEL BY PRE-WELDING EXPLOSION TREATMENT ＆Li Rongfeng Dai Shuhe Shen Shiming et al 742
荫罩框架钢及内磁屏蔽钢夹杂缺陷的控制＆程方武 刘昆华 孔勇江等 744
CONTROL OF INCLUSION DEFECT OF MASK FRAME STEEL AND INNER MAGNETIC SHIELD STEEL＆Cheng Fangwu Liu Kunhua Kong Yongjiang et al 744
高碳钢丝拉拔脆断原因分析＆袁长波 746
ANALYSES OF CAUSES FOR HIGH CARBON STEEL WIRE BRITTLE FRACTURE IN DRAWING＆Yuan Changbo 746
宝钢线材脱碳控制＆蔡震纲 748
ON DECARBERUZATION CONTROL OF WIRE COIL S SUFACE IN BAOSTEEL＆Cai Zhengang 748
DEVELOPMENT AND APPLICATION OF WIND COOLING BAINITE QIAO6#＆Li Chunyuan 750
空冷贝氏体桥6号钢的开发与应用＆李春远 750
DEVELOPMENT OF PRODUCTION PROCESSES AND QUALITY IMPROVEMENT OF ALLOY STEEL＆Zhao Dewen Guo Changwu Liu Xianghua et al 752
合金钢的质量改进与工艺开发＆赵德文 郭长武 王 辉等 752
TECHNICAL ADVANCE ON COMPACT EAF SPECIAL STEEL PLANT AT JYXC＆Shen Jianjun 757
兴澄“短流程特殊钢厂”的技术进展＆沈建军 757
COMPOSITION DESIGN OF AUTOMOBILE CARBURIZING GEAR STEEL＆Liu Yunxu Wu Hua Liu Cheng 761
汽车渗碳齿轮钢的成分设计＆刘云旭 吴化 刘澄 761
MC5钢冷轧工作辊热处理工艺研究＆于瑞芝 于建国 丁瑞明 765
A STUDY ON HEAT TREATMENT PROCESS OF MC5 COLD WORKING ROLL＆Yu Ruizhi Wang Jianguo Yu Ruiming et al 765
控轧控冷工艺对贝氏体型非调质钢SBL组织性能的影响＆乔兵 赵爱军 王辉 等 769
EFFECT OF MICROSTRUCTURE AND PROPERTIES OF CONTROLLED ROLLING AND COOLING IN BAINITE NON QUENCHED AND TEMPERED STEEL＆Qiao Bing Zhao Aijun Wang Hui et al 769
非调质预硬态塑料模具钢B30的焊补性能＆江来珠 阎启 772
REPAIR WELDABILITY OF NON-QUENCHED NON-TEMPERED PREHARDENED STEEL FOR PLASTIC MOULD B30＆Jiang Laizhu Yan Qi 772
汽车齿轮钢的现状及发展＆杨其苹 高怀 777
PRESENT STATUS AND DEVELOPMENT OF AUTOMOBILE GEAR STEEL＆Yang Qiping Gao Huai 777
铁路车辆用弹簧钢5160H的研制＆孙秀华 马永忠 782
NEW PRODUCTION OF SPRING STEEL 5160H FOR RAILWAY VEHICLE＆Sun Xiuhua Ma Yongzhong 782
国内模具钢的研究与开发状况＆孙学乐 刘德富 于瑞明 784
THE STUDY AND DEVELOPMENT SITUDATION OF DIE STEEL IN CHINA＆Sun Xuele Liu Defu YuRuiming 784
3Cr2W8V大截面锻材热处理工艺探讨＆尹熙武 786
THE INVESTIGATION ON HEAT TREATMENT FOR LARGE SECTION FORGINGS OF STEEL 3Cr2W8V＆Yin Xiwu 786
10Ni3MnCuAl（NAK80）高级镜面塑料模具钢试制＆郭晓军 788
TRIAL PRODUCTION OF PLASTIC MOULD STEEL 10Ni3MnCuAl（NAK80）＆Guo Xiaojun 788
12Cr1MoV高压锅炉管的试制＆刘志才 790
MANUFACTURE OF 12Cr1MoV HI-PRESSURE BOILER TUBE＆Liu Zhicai 790
THE SPECIALIZATION PRODUCTION OF STAINLESS STEEL WIRE ROD IN CHINA＆Tang Lüjin Liu Yu 791
中国不锈钢线材的专业化生产＆唐律今 刘宇 791
DANIELI CENTRO MASKIN 厂对一般级别和高质量不锈钢的在线检测和精整工艺＆Kjell Str?mberg et al 797
DANIELI CENTRO MASKIN S INLINE INSPECTION AND CONDITIONING PROCESS FOR STANDARD AND HIGH QUALITY STAINLESS STEEL GRADES＆Kiell Str?mberg et al 797
STUDY ON STRENGTH-TOUGHNESS OF MARAGING STAINLESS STEEL 00Cr11Ni10Mo2TiAL＆Song Weishun Liang Jianxiong Zhao Xiancun 800
00Cr11Ni10Mo2TiAl马氏体时效不锈钢的强韧性研究＆宋为顺 梁剑雄 赵先存 800
PREPARATION OF ULTRA HIGH PURITY Fe-Cr ALLOYS AND THEIR MECHANICAL PROPERTIES＆Cui Wenfang Bai Yuguang Ren Haipeng et al 806
超高纯Fe-Cr合金的制备及其机械性能＆崔文芳 白玉光 任海鹏 等 806
THE STUDY ON THE CORROSION RESISTANCE OF 304 AND 201 SERIES STAINLESS STEELS＆Qin Liyan Zhai Ruiyin Zhang Guoru et al 811
201不锈钢与304不锈钢耐腐蚀性能的研究＆泰丽雁 翟瑞银 张国儒 等 811
THE MORPHOLOGY OF ?-Cu PHASE AND ITS INTERACTION WITH DISLOCATION IN 17-4 PH STEEL＆Zhang Hongbin Wu Pengsheng Li Lishuang et al 815
17-4PH钢中？-Cu相的形貌及其与位错的交互作用＆张红斌 吴鹏生 李丽霜 等 815
G99钢的合金设计及性能研究＆苏杰 陈嘉砚 李荣 821
ALLOY DESING AND PROPERTIES OF G99 STEEL＆Su Lie Chen Jiayan Li Rong 821
MICROSTRUCTURE AND MECHANICAL PROPERTIES IN A-100 ULTRAHIGH STRENGTH STEEL＆Zhong Ping 825
A-100超高强度钢的组织与性能＆钟平 825
航天用新型无钴高强高韧钢G50研制＆王黎云 李生国 829
DEVELOPMENT OF NEW TYPE FREE-COBALT STEEL G50 WITH HIGH-STRENGTH AND HIGH-TOUGHNESS FOR AEROSPACE APPLICATIONS＆Wang Liyun Li Shengguo 829
G50钢残余奥氏体的研究＆陈嘉砚 苏杰 高银露 等 835
ON THE REMAINING AUSTENITE OF G50 STEEL＆Chen Jiayan Su Jie Gao Yinlu et al 835
DISCUSSION OF IMPROVING MECHANICAL PROPERTIES OF LOW ALLOY STEEL 15CdVG6＆Long Wenqing 839
提高15CdV6低合金钢工艺性能的探讨＆隆文庆 839
THE MICHANICAL PROPERTIES OF DOMESTIC 316Ti USED IN LMFBR＆Song Zhigang 841
国产钠冷快堆用核级316Ti的机械性能＆宋志刚 841
FACTORS OF AFFECTION ON MECHANICAL PROPERTIES AND COLD WORKABILITY OF THE STAINLESS STEEL 07X16H6＆Lei Dejiang 842
影响07X16H6不锈钢力学性能和冷加工性能的因素＆雷德江 842
EFFECT OF HOT-FORGING ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF THE NEWLY DEVELOPED SUPER-HIGH-STRENGTH STEEL-G50＆Jia Xinchao Chen Zhaosheng Lu Yan 844
新型超高强度钢G50热变形与组织性能的关系＆贾新朝 陈兆生 卢焰 844
AN ANALYSIS ON CAUSE OF LOW IMPACT VALUE OF STEEL D6AC＆Chen Dongfang Liu Yongxin 846
D6AC钢冲击值偏低原因分析＆陈东方 刘永新 846
亚稳定型奥氏体不锈钢盘条形变马氏体α‘影响因素研究＆王辉绵 乔玉 白晋钢 等 848
THE RESEARCH ON THE INFLUENCE FACTORS OF α‘INDUCED MARTENSITE BY DEFORMATION OF SUBSTEADY AUSTENITE STAINLESS STEELS WIRE ROD＆Wang Huimian Qiao Yu Bai Jingang et al 848
DYNAMIC TTT（CCT）CURVES AND MICROSTRUCTURE EVOLUTION DURING STRAIN ENHANCED TRANSFORMATION IN A Q235 PLAIN CARBON STEEL＆Yang Ping Cui Feng e Chang Shouhai et al 849
Q235碳素钢应变强化相变过程的动态TTT（CCT）曲线及组织演变规律＆杨平 孙祖庆 崔凤娥 等 849
Nb、V对超细晶粒钢组织和力学性能的影响＆刘清友 侯豁然 陈红桔 等 853
EFFECTS OF Nb AND V ON MICROSTRUCTURES AND MECHANICAL PROPERTIES IN ULTRAFINE GRAIN STEEL＆Liu Qingyou Hon Huoran Chen Hongju et al 853
THE STUDY ON THE MECHANISM OF FERRITE GRAIN REFINEMENT BY LARGE DEFORMATION ON THE LOW TEMPERATURE＆Zhang Hongmei Liu Xianghua Wang Guodong 857
采用低温大压下细化铁素体晶粒机制的研究＆张红梅 刘相华 王国栋 857
PRECIPITATION STRENGTHENING IN LOW CARBON STEEL PRODUCED BY THE CSP PROCESS＆Liu Delu Wang Yuanli Wang Zhong bing et al 861
CSP工艺低碳钢板的弥散沉淀强化＆柳得橹 王元立 王中丙 等 861
THE LATEST ADVANCEMENT OF CARBIDE FREE BAINITE/MARTENSITE DUPLEX PHASE STEEL＆Fang Hongsheng Bai Bingzhe Liu Dongyu et al 865
无碳化物贝氏体/马氏体复相钢的新进展＆方鸿生 白秉哲 刘东雨 等 865
ULTRA-FINE BAINITE/MARTENSITE COMPOSITE MICROSTRUCTURE STEEL＆Wang Xuemin Shang Chengjia Yang Shanwu et al 869
超细贝氏体/马氏体复合组织钢＆王学敏 尚成嘉 杨善武 等 869
THE INFLUENCE OF PURITY AND MICROSTRUCTURE ON PROPERTIES OF PIPELINE STEEL＆Chu Ruiqing Yang Zhenguo Yang Ke et al 873
洁净度和显微组织对管线钢性能的影响＆初瑞清 杨振国 杨柯 等 873
MICROSTRUCTURE EVOLUTION DURING DEFORMATION ENHANCED TRANSFORMATION AT STRAIN RATE OF 10s-1 IN A LOW CARBON STEEL＆Qi Junjie Yang Wangyue Bai Yuanqiang et al 877
低碳钢在应变速率为10s-1时形变强化相变的组织转变＆齐俊杰 杨王玥 白元强 等 877
STUDY OF ULTRA FINE GRAINED 800MPa GRADE MICROALLOYED STEEL＆Dong Han 881
超细晶粒800MPa级微合金钢的研究＆董瀚 881
TECHANIQUE OF RELAXATION AND PRECIPITATION CONTROLLING TRANSFORMATION-A NEW WAY TO REFINING MICROSTRUCTURES＆Yang Shanwu Shang Chengjia Wang Xuemin et al 887
组织超细化新工艺——弛豫析出控制相变技术＆杨善武 尚成嘉 王学敏 等 887
STUDY ON STRENGTH＆TOUGHNESS BEHAVIOR AND H2S CORROSION RESISTANCE OF ACICULAR FERRITE Zhao Mingchun Shan Yiyin Qu Jinbo et al 891
针状铁素体强韧性行为和抗H2S性能的研究＆赵明纯 单以银 曲锦波 等 891
EFFECT OF WARM DEFORMATION ON THE GRAIN REFINEMENT OF LOW CARBON MICROALLOYED STEELS＆Hou Huoran Liu Qingyou Chen Hongju et al 894
低温变形对低碳微合金钢晶粒细化及力学性能的影响＆侯豁然 刘清友 陈红桔 等 894
GRAIN REFINEMENT AND CARBIDE PRECIPITATION FOR LOW CARBON STEEL＆Li Weijuan Wang Guodong Liu Xianghua 897
低碳钢的晶粒细化与碳化物析出＆李维娟 王国栋 刘相华 897
ANALYSIS ON THE REFINED MICROSTRUCTURE EVOL VEMENT OF LOW CARBON STEEL HOT ROLLING STRIP PRODUCED BY CSP TECHNOLOGY＆Yu Hao Kang Yonglin Liu Delu et al 901
CSP技术生产热轧低碳钢板的组织细化研究＆于浩 康永林 柳得橹 等 901
INFLUENCE OF LOW TEMPERATURE DEFORMATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES FOR PLAIN CARBON STEEL＆Wang Ruizhen Yang Zhongmin Zhao Yan et al 905
低温变形对普碳钢组织及力学性能的影响＆王瑞珍 杨忠民 赵燕 等 905
STUDY OF DEFORMATION PARAMETERS AND METALLURGY PROPERTYS FOR ULTRA-FINE GRAIN STRUCTURE OF PLAIN CARBON STEEL＆Yang Zhongmin Wang Ruizhen Che Yanmin et al 909
普通碳素钢钢筋超细晶变形工艺的研究＆杨忠民 王瑞珍 车彦民 等 909
DYNAMIC RECRYSTALLIZATION OF FERRITE OF A PLAIN LOW CARBON STEEL DEFORMED AT 700℃＆Li Longfei Yang Wangyue Sun Zuqing 911
低碳钢在700℃变形时的铁素体动态再结晶＆李龙飞 杨王玥 孙祖庆 911
INVESTIGATION OF MICROSTRUCTURE EVOLUTION OF LOW CARBON STEEL BURING HOT ROLLING ＆Du Linxiu Liu Xianghua Wang Guodong 912
低碳钢热轧过程中组织变化的实验研究＆杜林秀 刘相华 王国栋 912
STRENGTHING AND TOUGHING OF BAINITIC STEEL＆Fang Hongsheng Bai Bingzhe Liu Dongyu et al 913
贝氏体钢的强韧化＆方鸿生 白秉哲 刘东雨 等 913