目录 1
The Role,Development,and Prediction of Microstructure in Polymer Processing Musa R.Kamal 1
Time-space Coupled Two-scale Method for the Heat Transfer Problem in Composite Material Structure With Periodicity Youai Li,Junzhi Cui 3
Modeling and Simulation in Polymer Micro-injection Molding L.James Lee 15
Optimization of Injection Molding by Combining Numerical Simulation with Surrogate Modeling Approach Jian Zhou,Lihsheng Turng 31
From Model Branched Polymers to Tailored Resins via Multi-scale Modelling Tom McLeish 55
Study of In-Mold Creep of Injection Molded Part Zhenfeng Zhao,Qian Li,Haihong Wu 58
The Influence of Processing Variables and Two-way Interactions on Shrinkage of Injection Molding Parts Wang Lixia,Zhuang Weiguo,Shen Changyu,Li Qian,Li Yinting 64
Evaluation of Weld-line in Nylon6 and its Nanocomposites by Formula Li Haimei Shen Changyu,Zhang Xueling 70
Framework for Optimization of Injection Molding Wang Xicheng,Gao Yuehua,Cui Zhendong,Yu Deqi 74
Simulation of Polymer Extrusion Process Chixing Zhou,Hong Zheng,Wei Yu 80
Time-resolved X-ray Scattering Study on Phase Transition in Quenched Mesomorphic Isotactic Polypropylene During Heating Junchai Zhao,Zhigang Wang 87
A Multi-Scale Numerical Simulation for Non-Isothermal Planar Contraction Flow of Polymeric Fluids with Fibers Suspension Zhang Hongping,Ouyang Jie 90
Computing Viscoelastic Flow in Injection Molding Based on Maxwell Model Ding Hai,Li Qian,Shen Changyu and Cao Wei 101
Numerical Modeling of the Filling Stage of Gas-Assisted Co-Injection Molding With Viscoelastic Fluid Model Kuang Tangqing,Zhou Guofa,Liu Hesheng 107
Gate Location Optimization of Plastic Injection Molding Based on Genetic Algorithm with Discrete Variables An Ran,Yu Deqi,Wang Xicheng 118
Rheological Studies on Phase Separation of Polyethylene Blends with Different Degree of Cross-linking Yanhua Niu,Zhigang Wang 124
Calculation of Viscoelastic Flow using Mesh Free Method and Stochastic Simulation Zhang Xiaohua,Ouyang Jie 127
A Study on the Isothermal Quiescent/flow-Induced Crystallization(FIC)of Isotactic Polypropylene Yu fengyuan,Zheng hong,Zhou chixing,Zhang hongbin 137
An Inverse Heat Conduction Problem in Estimating Surface Heat Flux by Bregman 140
Regularization Method Tao Tan,Xingsi Li 140
The Role of Carbon Nanotubes Network for Crystallization of iPP in Composites Donghua Xu,Zhigang Wang 147
Influence of Processing Parameters on Gas-assisted Injection Molding Kong Qian,Ouyang Jie,Zhang Xiaohua,Zhang Lin 149
The Study on Crystallization of Injection Molded Isotactic Polypropylene Liu Junyi,Dong Binbin,Shen Changyu,Cheng Jingbo 158
Warpage Optimization in Injection Molding Based on Kriging Model Gao Yuehua,Wang Xicheng 163
Flow Balance Design in Injection Molding Yuan Yanli,Tan Tao,Li Xingsi 169
Inversion of Injection Velocity by Bregman Regularization Ju Cuirong,Tan Tao,Li Xingsi 174
Relaxation and Crystallization from Oriented Lamellar Stacks in Simple Sheared Poly(Ethylene Terephthalate)by Small-Angle X-ray Scattering Yongbin Wang,Zhigang Wang 179
Design and Realization of Mould Grid Cui Zhendong,An Ran,Wang Xicheng 182
动态模具表面温度控制对于3D微特征产品成型品质影响-模拟与实验之研究 陈夏宗，张永鹏，张仁安，秦进传 187
“离位”RTM技术与RTM工艺的“离位”增韧技术 益小苏，许亚洪 195
以分子动力学模拟纳米尺度下射出成型之充填过程 张荣语，王唯赞，王镇杰 204
考虑熔胶凝固条件之薄壳射出件翘曲变形数值模拟 赵修武，庄英杰 208
结晶型聚合物微注射成型条件下动态非等温结晶动力学 蒋炳炎，吴旺青，翁灿，鲁世强 213
True 3D CAE visualization of intra-cavity filling imbalance in injectionmol-ding Jimmy C.Chien,Chaotsai Huang,Wenhsien Yang,and David C.Hsu 220
气体辅助注射成型玻纤增强PA66特殊的取向结构和拉伸性能 郑国强，杨伟，杨鸣波，黄莉，李尉，刘春太，申长雨 228
大型注塑模具型腔刚度优化分析 覃孟然，刘斌，冯彦洪，瞿金平 235
气辅成型过程中工艺参数对制品性能的影响 王小峰，李倩，申长雨 241
微孔注塑的初步实验研究 王建康，黄汉雄 247
微孔塑料注射成型过程的数学模型构建 陈建平，翟明，申长雨 250
注塑制品结晶度测定及热流分析 王松杰，申长雨 255
混合PID在注塑成型质量控制中的应用 张勤星，王利霞，李倩，申长雨 260
背压对精密制品重复精度的影响 赖士兴，杨卫民，丁玉梅，谢鹏程，耿立波，王兴天 267
应用Taguchi实验设计法最小化聚丙烯制品沉降斑 庄卫国，王利霞，申长雨 273
注射压缩成型工艺 韩珍，余晓容，申长雨 277
带嵌件注塑聚苯乙烯制品双折射分布的影响因素研究 韩健，申长雨，阎辰光，刘春太 284