ASTM核材料分析标准汇编 上PDF电子书下载

（上册） 1

1 核级二氧化铀粉末和芯块的化学、质谱和光谱化学分析的标准试验方法［ASTM C696-2011 Standard Test Methods for Chemical,Mass Spectrometric,and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets］&万红兵，付云杉，黄莹，译 1

2 核级二氧化钚粉末和芯块的化学、质谱和光谱化学分析的标准试验方法［ASTM C697-2010 Standard Test Methods for Chemical,Mass Spectrometric,and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets ］&孙银峰，武成玉，译 20

3 核级混合铀钚氧化物（（U,Pu）O2）的化学、质谱和光谱化学分析的标准试验方法［ASTM C698-2010 Standard Test Methods for Chemical,Mass Spectrometric,and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides（（U,Pu）O2）］&孙银峰，武成玉，译 70

4 核级钚金属的化学、质谱、光谱化学、核和放射化学分析的标准试验方法［ASTM C758-2004（2010年重新审批） Standard Test Methods for Chemical,Mass Spectrometric,Spectrochemical,Nuclear,and Radiochemical Analysis of Nuclear-Grade Plutonium Metal］&丁戈龙，杨杰，邹会军，译 122

5 核级硝酸钚溶液的化学、质谱、光谱化学、核和放射化学分析的标准试验方法［ASTM C759-2010 Standard Test Methods for Chemical,Mass Spectrometric,Spectrochemical,Nuclear,and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions］&孙银峰，译 139

6 核级银-铟-镉合金的化学和光谱化学分析的标准试验方法［ASTM C760-1990（2007年重新审批） Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys］&周运兰，译 173

7 六氟化铀的化学、质谱、光谱化学、核和放射化学分析的标准试验方法［ASTM C761-2011 Standard Test Methods for Chemical,Mass Spectrometric,Spectroehemical,Nuclear,and Radiochemical Analysis of Uranium Hexafluoride］&吉头杰，刘文彬，邵旭平，译 183

8 核级碳化硼的化学、质谱及光谱化学分析的标准试验方法［ASTM C791-2012 Standard Test Methods for Chemical,Mass Spectrometric,and Spectrochemical Analysis of Nuclear-Grade Boron Carbide］&李璐，许晨光，译 234

9 核级硝酸铀酰溶液的化学、质谱、光谱化学、核和放射化学分析的标准试验方法［ASTM C799-2012 Standard Test Methods for Chemical,Mass Spectrometric,Spectrochemical,Nuclear,and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions］&刘文彬，刘开明，译 273

10 核级氧化铝和氧化铝-碳化硼复合芯块的化学、质谱和光谱化学分析的标准试验方法［ASTM C809-1994（2007年重新审批） Standard Test Methods for Chemical,Mass Spectrometric,and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets］&邹晓禹，译 303

11 核级氧化钆（Gd2O3）粉末的化学和质谱分析的标准试验方法［ASTM C889-2011 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide（Gd2O3）Powder］&李吉花，译 315

12 烧结氧化钆及二氧化铀芯块分析的标准试验方法［ASTM C968-2012 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets］&王伟，译 320

13 放射性核素测定用表层土壤采样的标准规程［ASTM C998-2005（2010年重新审批） Standard Practice for Sampling Surface Soil for Radionuclides］&黄莹，李丽，译 331

14 放射性核素测定用土壤样品制备的标准规程［ASTM C999-2005（2010年重新审批） Standard Practice for Soil Sample Preparation for the Determination of Radionuclides］&范承蓉，译 336

15 α能谱法放射化学测定土壤中铀同位素的标准试验方法［ASTM C1000-2011 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry］&宋玉乾，刘文彬，曹希，译 341

16 α能谱法放射化学测定土壤中钚的标准试验方法［ASTM C1001-2011 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy］&丁戈龙，丁士伟，任立，译 348

17 核工业分析化学实验室质量保证大纲制定的标准指南［ASTM C1009-2006 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories within the Nuclear Industry］&贾瑞和，译 358

18 铀矿石浓缩物的化学和原子吸收分析的标准试验方法［ASTM C1022-2005（2010年重新审批） Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate］&宋玉乾，刘文彬，译 371

19 γ能谱法测定钚同位素组分的标准试验方法［ASTM C1030-2010 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry］&刘青，岳晓成，夏峰林，译 402

20 液体六氟化铀批量取样的标准规程［ASTM C1052-2001（2007年重新审批） Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride］&陈庆云，刘青，译 415

21 核工业实验室测量方法认证的标准指南［ASTM C1068-2003（2011年重新审批） Standard Guide for Qualification of Measurement Methods by a Laboratory within the Nuclear Industry］&高月华，陈建勇，译 421

22 铀矿石浓缩物取样的标准规程［ASTM C1075-2010 Standard Practices for Sampling Uranium-Ore Concentrate］&刘开明，刘文彬，译 427

23 控制电位库仑法测定钚的标准试验方法［ASTM C1108-1999（2006年重新审批） Standard Test Method for Plutonium by Controlled-Potential Coulometry］&柳伟平，刘文彬，译 441

24 电感耦合等离子体发射光谱法分析核废物浸出水溶液的标准规程［ASTM 1109-2010 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy］&夏峰林，岳晓成，译 455

25 电感耦合等离子体发射光谱法测定废物流中元素的标准试验方法［ASTM C1111-2010 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy］&唐德仲，译 466

26 核燃料循环材料分析用工作标准物质制备的标准指南［ASTM C1128-2001（2008年重新审批） Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials］&刁妍红，康翠英，译 475

27 无源γ射线分段扫描法无损分析低密度废料和废物中特种核材料的标准试验方法［ASTM C1133/C1133M-2010 Standard Test Method for Nondestructive Assav of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning］&刘青，汪南杰，付云杉，译 491

28 易碎核废物体张裂强度测定的标准试验方法［ASTM C1144-1989（2011年重新审批） Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms］&魏璐，译 516

29 核燃料循环材料分析用测量方法校准的标准指南［ASTM C1156-2003（2011年重新审批） Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials］&张彩云，译 524

30 α能谱法测定锕系元素用氟化钕源制定的标准规程［ASTM C1163-2008 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride］&任立，译 529

31 在铂工作电极上用控制电位库仑法测定H2SO4介质中钚的标准试验方法［ASTM C1165-2012 Standard Test Method for Determining Plutonium by Controlled- Potential Coulometry in H2SO4 at a Platinum Working Electrode］&刘文彬，胡东爽，译 534

32 分析用钚材料制备和溶解的标准规程［ASTM C1168-2008 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis ］&陆文博，译 543

33 钚存在下，磷酸体系中Fe（Ⅱ）还原／Cr（Ⅵ）氧化滴定法测定铀的标准试验方法［ASTM C1204-2002（2008年重新审批） Standard Test Method for Uranium in Presence of Plutonium by Iron（Ⅱ）Reduction in Phosphoric Acid Followed by Chromium（Ⅵ）Titration］&于红箭，译 550

34 α能谱法放射化学测定土壤中241Am的标准试验方法［ASTM C1205-2007（2012年重新审批） Standard Test Method for the Radiochemical Determination of Americium 241 in Soil by Alpha Spectrometry］&付云杉，译 564

35 Fe（Ⅱ）／Cr（Ⅵ）安培滴定法测定钚的标准试验方法［ASTM C1206-2002（2010年重新审批） Standard Test Method for Plutonium by Iron（Ⅱ）／Chromium（Ⅵ） Amperometric Titration］&刘文彬，陆文博，译 571

36 无源中子符合计数法无损分析废料和废物中钚的标准试验方法［ASTM C1207-2010 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting］&曾卫国，译 578

37 核工业分析化学实验室测量系统质量控制大纲制定的标准指南［ASTM C1210-2012 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories within the Nuclear Industry］&张丽丽，译 594

38 核工业用标准试验方法中精密度与偏差报告编写和解释的标准指南［ASTM C1215-1992（2006年重新审批） Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry］&臧清，译 602

39 六氟化铀中砷测定的标准试验方法［ASTM C1219-2005（2009年重新审批） Standard Test Methods for Arsenic in Uranium Hexafluoride］&刘文彬，刘开明，译 616

40 γ能谱法无损分析均匀溶液中特种核材料的标准试验方法［ASTM C1221-2010 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry］&汪南杰，王亚哲，译 625

41 X射线荧光法测定无机酸中铀含量的标准试验方法［ASTM C1254-1999（2005年重新审批） Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence］&李晓婷，译 637

42 能量色散X射线荧光光谱法分析土壤中铀和钍的标准试验方法［ASTM C1255-2011 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy］&李晓婷，译 646