结构完整性的评价、检验和监测PDF电子书下载

Conceptual and physical disparity inherent in the modeling of multiscale fatigue crack growth:nano-micro-macro&G.C.Sih 1

High-temperature fracture behavior of ceramic matrix composites:an overview&L.Guerra Rosa 17

Creep of plate-fin structures in compact heat exchangers&Shan-Tung Tu,Guo-Yan Zhou 29

A new method to fatigue initiation and crack growth prediction&Zengliang Gao,Baoxiang Qiu,Xiaogui Wang 37

Study on stress intensity factor of a finite width laminate&Jianjun Chen,Kee-Bong Yoon 47

An important sampling simulation for the failure probability of creep damage&Changhong Liu,Fu-Zhen Xuan 51

Residual fracture energy of cement past,mortar and concrete subject to high temperature&A.Menou,G.Mounajed,H.Boussa,A.Pineaud,H.Carre 55

Comparative assessment of fracture toughness data using diverse statistical distributions&Han-Ok Ko,Yoon-Suk Chang,Young-Jin Kim,Min-Chul Kim,Bong-Sang Lee 63

Modeling of thin film growth during metal dusting&Cheng Chen,Changyu Zhou,Guiming Hu,Na Lei 69

The local plastic collapse of ligament for circumferentially part-through wall cracked pipes&Zhaoji Hu,Teng Deng,Peining Li 75

The diffusion-induced stresses during metal dusting&Guiming Hu,Changyu Zhou,Cheng Chen,Na Lei 79

Optimum design of an active micro-mixer using the Kriging metamodel&J.Y.Park,J.S.Yu,M.K.Im,Y.K.Oh,J.Y.Park,Y.D.Kim,J.S.Maeng,S.Y.Han 85

A modified fracture criterion of maximum circumferential normal stress for an interface crack&Yumei Bao,Guozhong Chai,Xiaoyong Pan 91

Nonlinear analysis of prestressed concrete cable-stayed bridges with long span under construction state&Yun Liu,Chenglong Wei,Donghuang Yan,Xiaoyan Liu 95

Oblique section bearing capacity of reinforced concrete box beams strengthened with CFS&Xiaoyan Liu,Weiqing Zhu,Chenglong Wei,Fei Wu 99

Damage assessment for beam structure using perturbation method&Changzhao Qian,Deliang Chen 105

Modeling of multilayered thin film processed with laser forming&Jianhua Wu,Ying Jin,Zhenqiang Yao 111

Numerical simulation of tensile performance of polymers&Qin-Zhi Fang,Hyeon-Gyu Beom,Song Lin,Hui-Min Li 117

A parametric numerical analysis of stress intensity factors on multiple interacting surface cracks in T-butt joints using FRANCE3D&Sung-Won Kang,Myung-Hyun Kim,Wen-De Song,Kyu-Seon Jeong 123

Numerical simulation of mode I crack tip field on GTN void constitutive model&Xueyi Zhang,Guangping Zou,Yunzeng He 129

Numerical analysis of dynamic characteristics of the graphite heat exchange tube with half-ellipse cracks&Qiwu Dong,Yanan Li,Ke Wang,Yongqing Wang 133

Numerical simulation for the centrifuge and its reliability&Shaoping Zhou,Xiaoling Ge,Peining Li 139

The numerical simulation of multi-step sheet metal forming of aerosol can's cap&Jie Jin,Haiyan Qu,Meina Fan 143

The use of ABAQUS to simulate temperature and residual stress fields in tmclosed hoop weldments&Kunrong Jia,Zhufeng Yue 147

Finite element analysis of dynamic stress of the outdoor unit of air conditioner&Rong Yang,Shiyun Li,Shaoping Zhou,Jun Guo,Lanzhu Zhang,Hu Hui 153

Finite element numerical simulation of stamping forming of crossbeam for automobile&Xiaochun Ma,Yuping Ni,Weibing Shen 159

Post-buckling analysis of composite thick-skin multi-spar wing box under bend and twist load&Huafeng Liu,Zhufeng Yue 163

Stress analysis and structural optimization for the opening flat cover of pressure vessels&Wenhua Guan,Deming Fang,Kangda zhang,Ying Li 169

Fracture analysis of twisted rubber-steel sphere bush with an elliptical surface crack&Xiaoying Liu,Xiaoxiang Yang 173

A nonlinear high-order FEM for analysis of RC wall structures with material model of smeared rotating cracks&Songbai Cai,Pusheng Shen 179

Experimental study and numerical simulation on high temperature ＆ low cycle short fatigue cracks&Lu Wang,Zheng Wang,Dongbai Ai 185

A CDM model for remaining fatigue-lifetime prediction of ductile metals&Duyi Ye,Jinyang Zheng 191

Fatigue strength assessment for steel casting weld joints&Kyu-Seon Jeong,Myung-Hyun Kim,Sung-Won Kang,Wen-De Song 197

Torsional fatigue behaviors of 16MnR welded joint&Chao Li,Xuemei Luo,Gang Chen,Xu Chen,Weihua Zhang 203

The effect of multiple repairing weld and TIG-dressing on T-shape joints weld bead fatigue strength&Dongxia Li,Baochun Jia 209

The study of fatigue behavior of countersunk fastener holes&Jun Liu,Wenxuan Gou,Honglu Xu,Zhufeng Yue 213

LCF behavior and lifing of a directionally solidified nickel base superalloy at high temperature&H.C.Yu,Y.Li,X.R.Wu,X.G.Yang,D.Q.Shi 217

Effect of NiCrAlYSi coating on HCF behavior of a directionally solidified nickel base superalloy&Bin Zhong,Huichen Yu,Ying Li,Xueren Wu 223

Experimental study on fatigue behavior of honeycomb sandwich panel using three point bending tests&Xu Luan,Jun Liang,Jin Cheng,Chao Wang 229

Study on immune algorithm for the fatigue crack growth rate of 30Cr1Mo1V steel&Jian Chen,Zhao Wang,Jianjun He,Yanjie Ren,Maojun Li,Shide Li 233

An experimental study of fatigue crack growth with step loading condition&Wenfeng Tu,Xiaogui Wang,Zengliang Gao,Changzhe Shao 239

Low cycle fatigue behaviors of low-velocity-impacted(LVI)aluminum-alloy plate&Wei Liu,Bin Zhang,Zhufeng Yue 245

Effect of weld defect on fatigue life for electron-beam welded titanium alloy&Jianzhong Liu,Bo Chen,Lifa Wang,Benrun Hu,Xueren Wu 251

The influence of stress relaxation on high temperature creep life of steam turbine rotor steel&Shide Li,Jian Chen,Yanjie Ren,Jianjun He,Xuxiang Lu,Zhao Wang 257

The creep behavior analysis of PMMA with different stress and under different temperature&Zongzhan Gao,W.X.Gou,Zhufeng Yue 261

Creep-rupture property analysis and reliability prediction of creep-rupture life for low alloy heat-resistant CrMo steel&Yuanyuan Fang,Dongming Li,Jie Zhao 265

Investigation on creep crack growth ratein heat affected zone of welded joint for 9% Cr ferritic heat resistant steel&Lianyong Xu,Hongyang Jing,Junchao An,Delu Xu 271

Life prediction for high temperature bolting of ultra-supercritical units&Jinquan Guo,Fu-Zhen Xuan,Zhengdong Wang,Shan-Tung Tu 275

Selection of TTP parameter in creep-rupture life prediction&Jie Zhao,Dongming Li,Yuanyuan Fang 281

Experimental study on uniaxial time-dependent ratchetting-fatigue interaction of T6-6061AL alloy&Guozheng Kang,Yujie Liu,Jun Ding 287

Tensile and low cycle fatigue behavior of primary pipe material for PWR nuclear power plant&Fei Xue,Guogang Shu,Weiwei Yu,Wenxin Ti,Lei Lin,Chongzhe Shi 293

High temperature fatigue creep life prediction of 316L stainless steel under 2-step load&Jie Dong,Xuedong Chen,Zhichao Fan,Huifeng Jiang,Heng Jiang,Shouxiang Lu 299

Stress controlled fatigue-creep behavior of 316L stainless steel under different temperatures&Huifeng Jiang,Xuedong Chen,Zhichao Fan,Jie Dong,Heng Jiang,Shouxiang Lu 303

Limit load analysis of localized wall-thinning for steam generator tubes&Hu Hui,Peining Li 307

Safety analysis of pressure piping containing incomplete penetration under combined loads&Shuxin Han,Fei Wang,Shuiping Sheng,Zhijiang Jin 313

Safety assessment of large-scale tanks&Tao Liu,Shiming Shen 319

The safety evaluation and life prediction for local wall thinning elbows ofhigh temperature steam pipeline&Xiaohua He,Changyu Zhou 323

Reliability evaluation of structural systems subjected to seismic loading&Zhangjun Liu,Yaolong Lei 327

Reliability analysis of ice-covered wire subjected to wind load&Mianbin Zheng,Guohua Chen,Qipeng Li 333

Development of finite element program for analysis of seismic respond of large scale storage tanks&Liying Shen,Shiming Shen 339

Failure analysis of heat exchanger tubes used in a lithium bromide central air-conditioning unit&Zhiming Lu,Zhefeng Dai,Longjuan Zhang 343

Failure analysis of risk load on transmission tower&Minshan Liu,Mingying Sun,Qiwu Dong,Tong Liu,Lina Zhang 347

Fracture failure analysis of electric tool gear&Jianping Wang,Huiping Xie 351

Failure load of concrete beam reinforced by aramid fiber sheet under four-point bending at sheet rupture mode&Qingdun Zeng,Yonglu Zhou 355

Experimental study on failure behavior of concrete plates under different support conditions& Hongyuan Fu,Xiangxing Kong 361

Research on corrosion behavior of 16MnR steel and its welded joints in high-temperature naphthenic acid solution&Jiapei Cao,Guowei Cao,Zhou Fang,Yuanyuan Duan,Zhiping Chen,Xuedong Chen 365

Grey predication of corrosion on oil atmospheric distillation equipment&Zhengfang Wang,Yong Wang,Hui Qi,Jian Zhang,Dawei Qu,Xiuhua Liu 371

Stress corrosion cracking test of 16MnR steel in wet hydrogen sulfide and carbonate solutions&Yuexiang Dong,Bo Wang,Wei Zhang,Zengliang Gao,Tiecheng Yang 377

Experimental investigation on the adhesively bonded repair of composite structures&Qiyou Cheng,Xiaoyan Tong,Liuding Chen,Leijiang Yao,Shengli Lu 381

Experimental research on stress corrosion cracking of X70 pipeline steel in nitrate solutions&Bo Wang,Yuexiang Dong,Wei Zhang,Zengliang Gao,Tiecheng Yang 385

Research on anti-corrosion property of high-solid epoxy/polyurethane coating of magnesium alloys&Kezai Miao,Baiyang Lou,Bin Xu 389

Microstructure and mechanical properties of Cr9Mo tube after long time service at high temperature&Tan Chen,Heng Jiang,Xuedong Chen,Zhichao Fan,Xuelin Cao,Tao Wei 395

Fracture damage micro-mechanism of SnAgCu/Cu solder joint&Xiaohua Yang,Xiaoyan Li,Weizhen Dui 401

Experimental research on mechanical Property of SPV490Q steel after fire exposure&Yangfei Zhou,Jianping Zhao 407

A new method improving intergranular corrosion resistance of AISI 304 stainless steel:deep cryogenic treatment&Qiong-Qi Wang,Wei-Ze Wang,Fu-Zhen Xuan,Shan-Tung Tu 411

Effects of initial void damage induced by warm prestressing(WPS)on cleavage fracture of notched steel specimens&Guozhen Wang,Hong Wang,Fu-Zhen Xuan,Shan-Tung Tu,Zhengdong Wang 417

Damage detection for steam generator U-bend tubes from changes in their vibration modal characteristics&Tong Liu,Qiwu Dong,Minshan Liu 423

The fractal research of the tensile fracture for the grain filled polymer composite material ABS/TiO2&Anzhong Liu 429

The effect of environment on resisting chloride permeability in marine concrete&Qingling Wu,Hongfa Yu,Jiachun Wang 433

Impact fracture and residual stress analysis of 2Crl3 steam turbine blades after laser alloying&Jianhua Yao,Liang Wang,Fanzhi Kong,Chenghua Lou,Fang Luo 439

The shear strength of the flip-chip solder bump&Chunwei Ma,Enxia Zhang,Peiquan Xu,Jianping He 443

Definition of yield load on small punch test by means of double slope of elastic curve&Kaishu Guan,Ming Song,Yichang Huang,Lixun Zhao 447

Thickness effect on the ductile fracture properties of the vessel steel with small punch testing techniques&Zhaoxi Wang,Xiaoliang Zhang,Huiji Shi,Pan Shi 451

The environment fracture susceptibility of high-strength bainitic low alloy steels containing silicon&Xuechong Ren,Wuyang Chu,Yanjing Su,Lijie Qiao 457

Investigation on the cracking behavior of rolling contact fatigue of 1070 steel&Lijian Zhuang,Xiaogui Wang,Xuedong Chen,Zengliang Gao 463

Study of dynamic properties of flexible polyurethane foam&Lanzhu Zhang,Shaoping Zhou,Hu Hui 469

Thermal cycle behavior of atmospheric plasma sprayed thermal barrier coatings&Yamei Wang,Hongyu Qi,Xiaoguang Yang,Duoqi Shi 475

Calculating method of radial stiffness of cylindrical roller bearings&Hao Wu,Jianwen Wang,Qi An 481

Influence of the inner planetary gear on the dynamic loads of the reducer&Suohuai Zhang,Jiangfeng Zhang,Lei Li 487

Preparation of λ/4 type light quality EM wave absorber of EPS in S-band&Yuefang Zhang,Wanjun Hao,Jianjian Chen,Xiaoliang Zhao 493

Optimal excitation frequency for delamination detection in cross-ply laminated beams using A0 lamb mode&Yaolu Liu,Ning Hu 497

Pushover analysis and application for a continuous rigid frame bridge by considering high order vibrational modes&Xingye Chen,Xuesong Tang 501

Thermally induced vibration in a viscoelastic plate under the wave heat shock&Hao Hu 507

Effects of road surface roughness on vibration of highway bridge due to the vehicle&Chenggang Ma,Yongxing Lai,Minshan Liu,Miaomiao Tian 513

Application of object-oriented bayesian networks for PFFSA of the piping in the ammonia synthesis unit&Haoxuan Cui,Weiqiang Wang,Mengli Li,Dedong Hu,Huaixiang Cao 517

Fault diagnosis system of virtual compressor based on probabilistic neural network&Junfeng Pei,Chnnjing Shan 523

The relationship between hydrogen and ultrasonic surface wave attenuation of stainless steel&Wenbin Kan,Yebo Lu,Wenjun Shen,Hongliang Pan 527

An on-line health monitoring technique for hydrogen reformer tubes&Luyang Geng,Jianming Gong,Ruisong Zhu,Dongxing Xi,Yun Zhou 531

Application of surface technology to structural crack monitoring&Rong-Hong Cui,Yu-Ting He,Hong-Peng Li,Wen-Jun Shu 537

Thickness monitoring online by welded ultrasonic waveguide for pressure piping at high temperature&Bingjun Gao,Lin Fu,Yachao Zhang,Yanling Di 541

Monitoring of hydrogen embrittlement for hydrogenation processing plants&Zhengdong Wang,Zhanya Xing,Kuilong Zhu,Fuzhen Xuan 545

Effect of surface nanocrystallization on fatigue behavior of 35# carbon steel&L.B.Liao,D.Li,Z.Fan,H.Xu,L.Zhang 549

A study on improvement of replication method by applying electrolytic polishing technique&Gimo Yang,Jae-Kyun Lim,Kwan-Ju Lee,Kee-Bong Yoon 553

Author index 557

Keywords index 561